Funny Wallpapers Why a Tractor Instead of a Girl

Download Article

Download Article

Tractors come in all sizes with different horsepower engines. Tractors make farming easier and more efficient. You can attach a plow or blower and use your tractor to remove snow, attach a bucket and move wood, stone or mulch, use the forks to lift large logs, small dead trees and other heavy objects, and even use your tractor to mow your lawn. It's a versatile and essential rural tool.

1. 1

   Look for tractor safety issues. Walk around your tractor doing an inspection before climbing on. Loose wheel lugs, nuts or bolts may need periodic tightening.^[1]

2. 2

   Check your tractor's tire pressure. Low pressure in one or more tires may cause instability and create a safety hazard. If you're not driving your tractor every day, make it a routine to give the tires a quick once-over so you know they're in good shape before you get way out in a field.^[2]

   Advertisement

3. 3

   Inspect your stabilizer chains to ensure they are properly secured. Do this when your tractor attachments are behind the tractor.^[3]

4. 4

   Open the hood of your tractor. Check the cooling system, radiator and battery levels to make sure they are in the proper range.Make sure you have enough oil and fuel to complete the job or task at hand.

5. 5

   Be safe at all times. Wear good-quality boots with gripping soles, and keep any long hair tied back. Avoid dangling jewelry that could become caught in moving machinery, and avoid wearing loose or baggy clothing while operating a tractor. Always climb into the tractor using the proper hand holds.

Advertisement

1. 1

   Climb up into the tractor's seat. Familiarize yourself with the controls and find the clutch. Set the seat so you can reach the steering wheel, throttle, and other controls easily with your hands and feet.

   • Wear your seatbelt any time you're going to be around other vehicles. In the field, while it may seem like common sense to buckle your safety belt, you'll find almost no farmers strapping themselves in. More likely than an accident in your tractor will be the need to quickly turn off the engine and hop out and do something that needs doing. The safety roll bar will help to prevent serious injury. Practice good tractor safety and drive safely.

2. 2

   Press the clutch pedal down to the floor with your left foot. You want to be sure the transmission is in neutral as you turn it over.

3. 3

   Engage the break with your right foot. Turn the key forward to start the engine. When it turns over, drop the throttle slightly (without killing it) to let the engine warm up a little. If you jump straight from turning it over to driving, you'll likely stall.^[4]

4. 4

   To drive, release the tractor's parking break. Continue holding the clutch to the tractor floor and put the transmission into a first gear.

5. 5

   Slowly lift your foot off the clutch . Just as with any manual transmission, you want to be slow and smooth as you let the clutch out. It's a lot easier since you don't have to be actively pushing the gas. Keep the throttle at a low setting and take your foot off the brake.^[5]

6. 6

   Maintain a uniformly slow speed. Tractors aren't made for going particularly fast, they're made for durability and power. Don't push it. Go slowly, treating turns, curves, and hills with special caution.^[6]

   • Especially if you're using attachments and other hardware, go extremely slowly and use precaution when executing turns.

7. 7

   To stop the tractor, press the clutch to the floor completely. Switch the gears to neutral and set the parking brake. Slow the throttle. Turn the tractor key to the off position to stop the tractor engine.^[7]

Advertisement

1. 1

   Make sure all operators are trained and familiar with the tractor. For farm hands or employees younger than 16, familiarize yourself with OSHA labor standards regarding child labor. Some jobs involving heavy machinery are too dangerous to be performed by less experienced workers.

   • "HO/A #1 The FLSA prohibits youth under 16 years of age from operating a tractor of over 20 PTO (power-take-off) horsepower, and from connecting or disconnecting implements or parts to such a tractor."^[8]
   • In some places, it's necessary to obtain a registration to drive your tractor on the road (the UK and Australia, for example) while many other regions forego registration as long as your tractor displays reflective caution tape and is clearly visible.

2. 2

   Outfit your tractor with a mowing attachment. For heavy-duty weed control and maintenance of rough areas of your property, it's useful to get a mowing attachment to eliminate invasive weeds and brush.

3. 3

   Attach a tractor bucket and learn to use it. Most Kubotas and other common smaller tractors have a wide variety of attachments, including buckets that will make your tractor into a kind of small-scale backhoe. You can haul brush and other junk around your property.^[9]

   • Follow proper driving safety when adding a bucket. Never drive with the bucket in full "up" position, but always remember to raise it into the drive position so it's not dragging in the mud.

4. 4

   Use cultivator attachments on larger tractors to plow for planting. If you've got a row to hoe, the job is much easier with a cultivator to break up the dirt and help plant your crop.

5. 5

   Make sure any attachments heavier than the tractor itself have independent brakes. If you're using tractor attachments, you'll need to be especially careful to drive extremely carefully and use the guidelines outlined in the owner's manual for each implement, attachment, or device. Make sure that heavier attachments are outfitted with independent brakes in good working condition, and learn to use them.

6. 6

   Hitch all attachments properly. Make sure to follow proper safety precautions while hitching your tractor to wagons or other farming implements:

   • Make sure that the area in front and behind, making sure especially that no one is behind the tractor
   • Back the tractor up slowly
   • Practice a safe stop, applying the emergency brake
   • Put the transmission in neutral
   • Dismount the tractor and hitch up^[10]

Advertisement

Add New Question

• Question

  What gear should be used when climbing a hilly region with a high load?

  

  You should use a lower gear in order to go up hills with high loads. At lower gearing, the tractor is able to produce more torque, which is essential in transporting heavy loads. Depending on how many gears the tractor has, you should go no higher than 3rd gear. If the tractor has multiple ranges, use low range.

• Question

  How do I know which shifter is which?

  

  On an older tractor, the PTO engagement is under the seat. The regular shifter is the longest one in the middle of the center console, and the hi-low range shifter is short and located on either side of the main shifter.

• Question

  How do you slow the tractor down while in motion?

  

  In order, use a combination of decreasing the throttle, down-shifting through gears and finally using the brakes to cease forward motion altogether. This approach works with the machine's components in their natural order, using the strongest systems first to do the most work and progressing down from there.

• Question

  How does a gear lever look like?

  

  The gear shift, on most farm tractors, is located either to the right on the console, or in the center on the floor, between the clutch and brake pedals.

• Question

  In what position should the bucket be when driving the tractor around?

  

  If the bucket is too high, it will throw off the center of gravity; too low, and you'll dig in the dirt. You want it just high enough to clear any unexpected obstacles.

• Question

  How do I know what size battery my tractor needs? I have acquired an old tractor with no battery.

  

  Generally the size does not matter as long as it is not too big to fit in. As long as the voltage and amperage is the same you shouldn't encounter any problems. Most tractors utilize standard car style batteries, and older ones use those similar to the size of a car. I recommend NAPA batteries, as they generally last longer and hold their charge better than others.

• Question

  What do I do if the brakes and clutch hit the floor instantly when starting a tractor?

  

  The clutch will always hit the floor, but your brakes need to be pumped or checked.

• Question

  How do I put a tractor in reverse?

  

  Ensure the clutch is making contact with the floor, then move the gear stick from either neutral or whatever gear you're in while at a complete stop. Then move said stick into the reverse position, which should be on the far bottom right or top farthest left.

• Question

  How do I start a tractor?

  

  Depress the clutch pedal and the brake, making sure you're in neutral. Turn the key to the first position, allowing the glow plugs to cycle (which should take 2 - 3 seconds), then turn the key just like a car and start the tractor.

• Question

  How can I attach a trailer to a tractor?

  

  Jack Stutts

  Community Answer

  With a ball hitch. You can buy a 3 part attachment that has a hitch adapter. You can also use a draw bar if the ball fits in the holes, but note that a draw bar will spin.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• Don't go too fast on your tractor.

• Use caution on slopes and hills. Be sure to slow down for turns.

• Use caution when putting on and taking off different tractor attachments.

• Tractors are not toys. Keep all children off of and away from your tractor.

Advertisement

• Never take chances or rush while operating your tractor.

• Never leave your tractor running and unattended.

• Never start a tractor unless you are in the tractor's seat. Accidents have occurred because tractors have accidentally run over their owners.

• Do not start your tractor's engine in an enclosed garage or shed. Exhaust gas contains carbon monoxide, which can be deadly.

Advertisement

About This Article

Article Summary X

If you want to drive a tractor, press the clutch pedal down with your left foot and put the transmission in neutral, then press the break with your right foot. Once you've done that, turn the key to start the engine. Release the tractor's parking brake while still holding the clutch, and put the transmission in first gear. Slowly lift your foot off the clutch, then take your foot off the brake. At this point, the tractor will start moving forward. Drive slowly, and use caution on turns, curves, and hills. To stop the tractor, press the clutch to the floor, switch the gears to neutral, and set the parking brake. Keep reading to learn about operating the tractor safely, including what you should wear!

Did this summary help you?

Thanks to all authors for creating a page that has been read 295,427 times.

Did this article help you?

petersenshmis1976.blogspot.com

Source: https://www.wikihow.com/Drive-a-Tractor

Share this post